Faculty At Mechanical Department



Asim Gopal Barman
Asim Gopal Barman
Assistant Professor Grade-I
Basic Information Research Interest:-Broad Areas: Production and Industrial Engineering, Engineering Optimization (Design & Manufacturing), Operations Management.
Email :- asim@nitp.ac.in
Phone :-

Subjects Teaching in Department
  1. Industrial Engineering and Management (B.Tech. 4th Semester Students)
  2. Quality Engineering (For M.Tech 2nd Semester Students)
  3. Production and Operations Management (For B.Tech. 5th Semester Students)
  4. Operations Research (For B.Tech. 6th Semester Students)
  5. Supply Chain Management (For M.Tech. Students)
  6. Production Planning and Control (For M.Tech. Students)
  7. Quality Assurance and Reliability (for B.Tech. 8th Semester Students)
  8. Research Methodology (for Ph.D. Scholars)
  9. Engineering Optimization (for M.Tech. Students)
  10. Total Productive Maintenance (for B.Tech. 7th Semester Students)
  11. Machine Drawing (for B.Tech. 3rd Semester Students)
  12. Engineering Drawing (for B.Tech. 1st / 2nd Semester Students)
Educational Qualification
  1. Ph.D. (Engg.) - Jadavpur University - 2012
  2. M.E. (Production Management) - Jadavpur University - 2006
  3. B.E. - Jadavpur University - 2004
    Memberships & Society
    1. INDIAN SOCIETY FOR TECHNICAL EDUCATION (Life Member)
      Current Administrative Responsibility
      1. Member, Doctoral Research Committee, Dept. of Mechanical Engineering, NIT Patna
      2. Member, Board of Studies, Dept. of Mechanical Engineering, NIT Patna
      3. UG Coordinator, Dept. of Mechanical Engineering
      4. Member, Working Committee, Design Innovation Center, NIT Patna
        Past Administrative Responsibility
        1. Professor in Charge, Training & Placement Cell, NIT Patna
        2. Placement Officer, Training & Placement Cell, NIT Patna
        3. Member (Assistant Warden), Hostel Management Committee
        4. Facuty Advisor (M.Tech. Production Engineering)
        5. Member, Doctoral Research Committee, Mechanical Engineering Department
          Work Experiences
          1. Assistant Professor, Dept. of Mechanical Engg. Future Institute of Engineering & Management (WBUT), Kolkata.
          2. Senior Research Fellow, Dept. of Production Engineering, Jadavpur University
            Books
            1. Book Chapter in Advanced Engineering Optimization Through Intelligent Techniques. Title: Tooth Profile Optimization of Helical Gear with Balanced Specific Sliding Using TLBO Algorithm, Paridhi Rai and Asim Gopal Barman, Advances in Intelligent Systems and Computing, Volume: 949. Page No. 203 - 210. Springer, Singapore. Print ISBN 978-981-13-8195-9 (DOI:https://doi.org/10.1007/978-981-13-8196-6_19), July - 2019.
            2. Book Chapter in Information Science and Applications. Title:e-Learning Recommender System for Teachers using Opinion Mining, Anand Shanker Tewari, Anita Saroj and Asim Gopal Barman, Lecture Notes in Electrical Engineering,Volume-339,Page 1021-1029,[ISBN 978-3-662-46577-6] DOI 10.1007/978-3-662-46578-3_122 - 2015.
            3. Book Chapter in Information Processing and Management, CCIS 70. Title: Strategic Initiatives and Automated Decision Support with ERP System Environment, Asim Gopal Barman, Ranjan Bhattacharya and Sudip Kumar Deb, Springer (Germany), 2010. (Print ISBN: 978-3-642-12213-2 DOI:10.1007/978-3-642-12214-9_116).
              Journals
              1. Paridhi Rai and Asim Gopal Barman, Optimizing the design of straight bevel gear with reduced scoring effect. Engineering Computations. , March - 2020,https://www.emerald.com/insight/content/doi/10.1108/EC-06-2019-0250/full/html (SCIE, IF: 1.246).
              2. Paridhi Rai and Asim Gopal Barman, An approach for design optimization of helical gear pair with balanced specific sliding and modified tooth profile. Structural and Multidisciplinary Optimization. , January - 2019,DOI: https://doi.org/10.1007/s00158-019-02198-7 (SCIE, IF: 3.925).
              3. Sandeep Tiwari, Paridhi Rai and Asim Gopal Barman, Effect of misalignment on tooth stress under varying frictional and loading conditions of polymer helical gear. Materials Today: Proceedings. - 2019,DOI: https://doi.org/10.1016/j.matpr.2019.09.081 (Scopus).
              4. Paridhi Rai and Asim Gopal Barman, Design optimization of spur gear using SA and RCGA. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40(257), May - 2018,DOI:https://doi.org/10.1007/s40430-018-1180-y (SCIE, IF: 1.743).
              5. Anand Shanker Tewari and Asim Gopal Barman, Sequencing of items in personalised recommendations using multiple recommendation techniques. Expert Systems with Applications. 97, May - 2018,70-82, DOI:https://doi.org/10.1016/j.eswa.2017.12.019 (SCIE, IF: 4.292).
              6. Sanjay Kumar, Saurabh Kumar and Asim Gopal Barman, Supplier selection using fuzzy TOPSIS multi criteria model for a small scale steel manufacturing unit. Procedia Computer Science. 133, July - 2018,905 - 912, Https://doi.org/10.1016/j.procs.2018.07.097 (Scopus).
              7. Paridhi Rai, Aman Agrawal, Mohan L. Saini, Chinmay Jodder and Asim Gopal Barman, Volume optimization of helical gear with profile shift using real coded genetic algorithm. Procedia Computer Science. 133, July - 2018,718 - 724, Https://doi.org/10.1016/j.procs.2018.07.127 (Scopus).
              8. Anand Shanker Tewari, Jyoti Prakash Singh and Asim Gopal Barman, Generating Top-N Items Recommendation Set Using Collaborative, Content Based Filtering and Rating Variance. Procedia Computer Science. 132, June - 2018,1678-1684, Https://doi.org/10.1016/j.procs.2018.05.139 (Scopus).
              9. Anand Shanker Tewari, Asim Gopal Barman, Collaborative Recommendation System Using Dynamic Content based Filtering, Association Rule Mining and Opinion Mining. International Journal of Intelligent Engineering & Systems. 10(5), March - 2017,57-66, DOI:DOI:10.22266/ijies2017.1031.07 (Scopus).
              10. Gautam Ranjan, R. K. Pandey, Asim Gopal Barman, Analysis of failure in adhesively bonded joints using traction separation theory. Applied Mechanics and Materials Journal. Vol. 612, October - 2014,117-122, Doi:10.4028/www.scientific.net/AMM.612.117 (Scopus).
              11. Asim Gopal Barman, Sudip Kumar Deb and Ranjan Bhattacharya, Enterprise Resource Planning (ERP) System under Manufacturing Environment. Industrial Engineering Journal. Vol-II(No. 18), December - 2010,Page No. 9 - 11, .
              12. Asim Gopal Barman, Sudip Kumar Deb, Ranjan Bhattacharya, Emerging Trends of Ant Colony System in Solving Decision Problems Under Industrial Engineering. Industrial Engineering Journal. Vol-I(No. 4), October - 2008,Page No. 5 - 8, .
                International Conferences
                1. Sutanu Misra, Goutam Paul and Asim Gopal Barman, Investigation on the effects of nose radius and rake surface of cutting tool for machinability during sustainable turning of EN 31 alloy steel, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019).  (Accepted for oral presentation and publication), IIT Mandi,December - 2019, To be published by suitable Journal.
                2. Koustov Mondol, Goutam Paul and Asim Gopal Barman, Effect of Tool geometry on chip morphology formed during CNC turning of a round shaped product, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019).  (Accepted for oral presentation and publication), IIT Mandi,December - 2019, To be published by suitable Journal.
                3. Paridhi Rai and Asim Gopal Barman, Design optimization of worm gear drive with reduced power loss, 10th International Conference on Mechatronics and Manufacturing (ICMM 2019).  Chulalongkorn University, Bangkok, Thailand,January - 2019, IOP Conf. Series: Materials Science and Engineering 635 (2019) 012015. doi:10.1088/1757-899X/635/1/012015.
                4. Anand Shanker Tewari, Raunak Jain, Jyoti Prakash Singh and Asim Gopal Barman, Personalized Product Recommendation Using Aspect Based Opinion Mining of Reviews, International Conference on Ethical Hacking (eHaCON-2018), 2018.  443-453, Kolkata - 2018, Advances in Intelligent Systems and Computing book series (AISC, volume 811). Published by Springer, Singapore. https://doi.org/10.1007/978-981-13-1544-2_36.
                5. Paridhi Rai, Asim Gopal Barman, Design of bevel gears using accelerated particle swarm optimization technique, 9th International Conference on Mechatronics and Manufacturing (ICMM 2018).  Volume 361, Issue 1, 012016 (May, 2018), Phuket, Thailand,January - 2018, IOP Conf. Series: Materials Science and Engineering 361 (2018) 012016 (doi:10.1088/1757-899X/361/1/012016).
                6. Paridhi Rai, Asim Gopal Barman, Volume optimization of Two-stage gearbox using GA, 4th International Conference on Production & Industrial Engineering (CPIE-2016).  Dr. B R Ambedkar National Institute of Technology Jalandhar, Punjab, India,December - 2016, .
                7. Anand Shanker Tewari, Asim Gopal Barman, Collaborative book recommendation system using trust based social network and association rule mining, 2016 2nd International Conference on Contemporary Computing and Informatics (IC3I).  85-88, Noida, India,December - 2016, Published by IEEE (DOI: 10.1109/IC3I.2016.7917939).
                8. Anand Shanker Tewari, Naina Yadav, Asim Gopal Barman, Efficient tag based personalised collaborative movie reccommendation system, 2016 2nd International Conference on Contemporary Computing and Informatics (IC3I).  95-98, Noida, India,December - 2016, Published by IEEE (DOI: 10.1109/IC3I.2016.7917941).
                9. Kumari Priyanka, Anand Shanker Tewari, Asim Gopal Barman, Personalised Book Recommendation System based on Opinion Mining Technique, International Conference on Communication Technologies.  285-289, Kanyakumari, India,April - 2015, Published by IEEE (DOI: 10.1109/GCCT.2015.7342668).
                10. Anand Shanker Tewari, Tasif Sultan Ansari, Asim Gopal Barman, Opinion Based Book Recommendation Using Naïve Bayes Classifier, International Conference on Contemporary Computing and Informatics (IC3I).  139 -144, Mysore,November - 2014, DOI:10.1109/IC3I.2014.7019672.
                11. Anand Shanker Tewari, Abhay Kumar, Asim Gopal Barman, Book Recommendation System Based on Combine Features of Content Based Filtering, Collaborative Filtering and Association Rule Mining, 4th IEEE International Advance Computing Conference.  500 - 503, Gurgaon,February - 2014, DOI:10.1109/IAdCC.2014.6779375.
                12. Asim Gopal Barman, Ranjan Bhattacharya, Sudip Kumar Deb, Risk Pooling in Supply Chain with Enterprise Resource Planning (ERP) System Environment, 3rd International and 24th All India Manufacturing Technology, Design and Research (AIMTDR) Conference.  Pages 341 - 346, ,December - 2010, .
                National Conferences
                1. Shiladitya Sengupta, Asim Gopal Barman, Joydeep Mukherjee and Bhaskar Sinha, Tolerance Design Optimization of Machine Elements Using Real Coded Genetic Algorithm, National Conference on Industrial Engineering (NCIE 2011).  WBUT,February - 2011, .
                2. Dibyanarayan Hazra, Asim Gopal Barman, Suman Bhadra and Sounik Datta, Optimum Path Planning For Co-operative Robots Using Genetic Algorithm, National Conference on Industrial Engineering (NCIE 2011).  WBUT,February - 2011, .
                3. Asim Gopal Barman, Ranjan Bhattacharya and Sudip Kumar Deb, Supply Chain Management and ERP system: Strategic Aspects for Decision Support, National Conference on Recent Advances in Manufacturing Technology and Management.  386 - 391, Jadavpur University,February - 2010, .
                4. Asim Gopal Barman, Sudip Kumar Deb and Ranjan Bhattacharya, Automated Decision support System under Enterprise Resource Planning System Environment, XIII Annual Conference of the Society of Operations Management.  IIT Madras,December - 2009, .
                Professional Services
                1. Reviewer of Mechanics Based Design of Structures and Machines: An International Journal (SCI Indexed Journal, Taylor and Francis)
                2. Reviewer of Proceedings of the Institution of Mechanical Engineers: Part C (SCI indexed Journal, SAGE)
                3. Reviewer of International Journal of Mechanism and Machine Theory (SCI indexed Journal, Elsevier)
                4. Coordinator of Faculty Development Program on “Intellectual Property Rights (IPR)
                5. Coordinator of Faculty Development Program on “Engineering Optimizations, Innovations and Applications (EOIA)” during 17/06/2013 to 21/06/2013 at NIT Patna (Sponsored by TEQIP-II).
                6. Invited member of Course Structure and Syllabus Review Committee, Aryabhatta Knowledge University, Patna
                7. Invited talk on “Industry 4.0: Leapfrog Opportunity for India” organized by National Productivity Council (Patna, Bihar)
                8. Invited lecture for students at Mahatma Gandhi Central University, Motihari, on “Engineering Graphics”
                Phd Students
                1. Mr. Chandan Kumar - Design Optimization and Analysis ( Jul 2019 - Continue ).
                2. Mr. Rajeev Ranjan - Selection of Manufacturing Resources using MCDM ( Jul 2019 - Continue ).
                3. Mr. Sutanu Mishra - Optimization of Machining Process Parameters ( Aug 2018 - Continue ).
                4. Mr. Koustov Mondol - Optimization of Machining Process Parameters ( Aug 2018 - Continue ).
                5. Mr. Sandeep Tiwari - Design Optimization ( Aug 2018 - Continue ).
                6. Mr. Sanjay Kumar - Supply Chain & Operations Management ( Feb 2016 - Continue ).
                7. Dr. Paridhi Rai (Awarded w.e.f. 20/09/2019)) - Design Optimization of Gears for Compact Size with Improved Strength ( Aug 2014 - May 2019 ).
                8. Dr. Anand Shanker Tewari (Awarded w.e.f. 12/12/2018)) - High Precision Recommendation System for E-commerce Websites ( 2013 - 2018 ).